SSP 110 D

The SSP 110 D ballast spreading and profiling machines form the required standard ballast profile in tracks and points. The machines fill, profile and sweep the track. They have brush shafts for all track systems.

Functional characteristics

  • Automatic traverse restrictors of the side ploughs prevent the standard track clearance envelope from being exceeded
  • Rapid brush shaft replacement unit
  • Base vehicle for propulsion and power supply
  • Two end-to-end axles driving axles
  • Two vertically and horizontally adjustable side ploughs at the front section of the machine
  • With levelling plough unit for heaviest ballast jobs – consisting of two plough halves running in the direction of the track that can be lowered independently of one another
  • Sweeping system including one sweeping brush and a transverse conveyor belt for filling the holding compartments or conveying unneeded ballast to the transverse conveyor belt
  • Rotational speed of the brushing drive can be continuously adjusted up to max. 350 rpm
  • Removal of ballast between tracks and fastenings by means of two small fastening brushes located behind the front axle

Technical specifications

Overall weight 40 t
Height above top of rail 4.680 mm
Length over buffers 17.000 mm
Number of axles 3
Engine output 300 kW
Maximum speed in train formation 100 km/h
Maximum self-propelled speed 90 km/h
5 adjustable middle plough settings, Traverse restrictor for plough on multiple-track lines yes

Performance parameters

Track maintenance performance 1,600 m/h
Track renewal performance 1,200 m/h
Working radius ≥ 120 m
Running radius ≥ 120 m
Working in cant max. 180 mm